Home » Store » Car Audio and Visual » Amplifiers » Rockford Fosgate R150X2 Prime 2 channel Amplifier

Rockford Fosgate R150X2 Prime 2 channel Amplifier

$409.00

Now upgraded to Prime R2-200×2

SKU: Rockford Fosgate R150X2 Prime 2 channel Amplifier Category:
Description

Now upgraded to Prime R2-200x2 Amp - The PRIME R150X2 is a 2-channel amplifier that can pump-out 75 Watts into both channels at 2-Ohms, making it perfect for full-range or component speakers. The R150X2 can also run in bridged/mono mode for use with subwoofers.

Enquire Now

 

 

 

 

  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • RCA pass-thru outputs
  • High Level Input (4-pin)
  • Real time output and power supply thermal sensing
  • Cast aluminum heatsink
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Over current protection
  • Short circuit protection
  • Muted turn on
  • 1 Year Standard Warrant

 

 

Number of Channels:2
Rated Power
(RMS Continuous Power):
50 Watts x 2 @ 4-Ohm
75 Watts x 2 @ 2-Ohm
150 Watts x 1 @ 4-Ohm Bridged
Total Power
(Sum of Rated Power):
150 Watts RMS
Dynamic Power
(PVC/PowerCube®):
61 Watts x 2 @ 4-Ohms 0° Res
94 Watts x 2 @ 2-Ohms 0° Res
Frequency Response:20Hz - 20kHz +/-1dB
Crossover Controls:High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth

 

 

CEA-2006 Compliant

 

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

 

CE Compliant

 

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
The ce mark is the official marking required by the European Community for all Electrical and Electronic equipment (and others) that will be sold, or put into service for the first time, anywhere in the European community.

It proves to the authorities, but also to the buyer -or user- that this product fulfills all essential safety and environmental requirements as they are defined in the so-called European Directives.

The ce marking directive (93/68/EEC) was adopted on 07-22-1993 and updated as 768/2008 EC on 13-8-2008.

The directive gives a detailed description of the initials CE and any other marks specific to a particular directive and the many ways conformity may be acquired.

In return for fulfilling the CE marking requirements, the manufacturer or its agent gets the permission to cover the entire European market using only one approval procedure for the topics covered in the applicable directives.

No member state of the European Community can refuse trade of any (electronic or electrical) product that has been CE marked (unless fraud suspected). For some products however, national regulations exist, as long as the requirements covered in these national regulations are not covered by a pan-European Directive.

 

 

Class-AB

An amplifier topology with the best of both worlds; a Class A preamp and Class B output stage.
Class A topologies area great for sound quality but can require alot of current. Class B designs are great for power delivery. Amplifier designs utilizing a Class A/B topology reaps the benefit of great sound quality in the front-end (preamplifier stage) while delivering great power in the output stages (MOSFET drivers).

 


 

 

 

Additional information
Weight 3 kg
Dimensions 32 × 22 × 7 cm
Brand

Rockford Fosgate

Number of Channels

2 channel

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Rockford Fosgate R150X2 Prime 2 channel Amplifier”

Your email address will not be published. Required fields are marked *

Shipping & Delivery