Product updates are changing regularly, some Car Solutions may say out of stock. BUT- Please confirm via email or we can design a system that is equal too or better for the same price, so it is best to contact us. Please understand it's hard to guarantee exact delivery.
What do I need to spend to get into Dynaudio Original price was: $10,855.00.$9,719.10Current price is: $9,719.10.
What do I need to spend to get into Paradigm Original price was: $6,053.00.$5,156.07Current price is: $5,156.07.
Dynaudio Emit 25C Center Speaker
$1,199.00
Description
Emit 25C
Hi-fi starts with Emit
A dedicated centre channel for multi-channel systems
"We put the same attention to detail into developing all our products, and we share as much technology as we can across our ranges to bring authentic Dynaudio performance to every speaker we make. Emit might be the entry point, but it offers much more than just a glimpse into our high-end world."
Stephen Entwistle, Senior Acoustics Engineer
It’s been said that the soundtrack is up to 80 per cent of the movie-going experience. And the centre speaker is the most crucial part of that. Say ‘hej’ to Emit 25C…
It could be argued that the centre channel is the most important part of any surround-sound system. It’s where the lion’s share of dialogue comes from in a movie, and it’s where the focal point of the music often comes from in a multi-channel mix. It’s crucial to get it right.
Emit 25C gets it right.
It’s essentially an Emit 30, turned on its side, with the mid/bass drivers placed either other side of the tweeter. The drivers are the same; the crossover is the same, with a different box and port-tuning. But that’s not doing it a disservice; quite the opposite. It means you get total consistency between the centre speaker and the two flanking it (whether those are Emit 10s, 20s, 30s or even 50s), along with any others you place around your listening position.
High-quality mid/bass drivers
Emit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer.
It’s a material we developed decades ago, and have been refining ever since for use in all our most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound.
The voice-coils themselves are made from lightweight aluminium wire, clad in a thin layer of copper. We’ve use aluminium here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics.
Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family.
The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win.
Top-end performance
Emit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family.
It’s based on the renowned Esotar Forty tweeter found in our Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimises airflow. As with Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session.
Danish-designed cabinetry
Emit 25C is available in three custom laminate finishes: Black, White and Walnut.
They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a centre channel, where (as much as we hate to say it), you should be spending more time looking at the picture above it than the speaker itself.
Emit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.
Additional information
| Weight | 35 kg |
|---|---|
| Dimensions | 56 × 40 × 105 cm |
| Colour | Walnut Wood ,Satin Black ,Satin White |
Reviews (0)
Shipping & Delivery
Related products
Yamaha NSP60 Centre and Rear Pack
The three-speaker complement of the NS-P60 includes a pair of two-way acoustic suspension surround speakers and a two-way acoustic suspension center channel speaker Overview
- High Sensitivity and Wide Dynamic Range
- Design for Contemporary A/V Sources
- 2-Way Acoustic Suspension Design
- 2.2cm Balanced-Dome Tweeter
- Magnetic Shielding
Reviews
There are no reviews yet.