Helix IK S10 Slim 10″ Subwoofer

$650.00

In stock (can be backordered)

Category:
Description

HELIX IK S10

Flat dimensions – deep bass

With the shallow HELIX IK S subwoofers, the realization of particularly flat and compact enclosure designs shouldn’t be a problem anymore. Its extremely low installation depth opens up new installation possibilities that do not require making any acoustic compromises at all. Additionally, thanks to the use of large voice coils and its low resonant frequency, the HELIX IK S series delivers an absolutely stunning bass performance, which is in no way inferior to larger dimensioned woofers.

Smart down to the very last detail

The enormously stiff sandwich paper cone in conjunction with our heavy-duty drive system easily converts amplifier power into powerful sound pressure without any compression effects, while simultaneously demonstrating finesse when it comes to more subtle beats. A special highlight: the magnet system has a threaded hole on the back and thus allows the woofer to be fixed to the back panel of the enclosure. Since every millimeter of depth counts in flat constructions, enclosure vibrations are effectively reduced – even with thin walls.

Flexible connection

Designed as a 1 x 2 Ohms (SVC2) or 2 x 2 Ohms (DVC2) variant, you can find the right low bass specialist for any amplifier configuration to get the maximum performance out of it.

“All inclusive” for self-made enthusiasts

In addition to the high-quality connection terminal with gold-plated screw terminals, a solid protective grille and gasket are also included. For optimal bass performance in DIY installations you can find recommendations for sealed and vented enclosures with all parameters such as net volume, port tuning frequency or DSP settings in our technical data sheet.

Features

  • Chassis with particularly low installation depth – optimized for compact and shallow enclosure constructions
  • 2 x 2 Ohms dual voice coil for flexible system configuration
  • Magnet system with threaded hole on the back – allows screwing to the back panel of the enclosure for stabilization and reduction of enclosure vibrations
  • Extremely stiff sandwich paper cone
  • Long-excursion rubber surround for highest mechanical rating
  • Rugged magnet cover with HELIX lettering for perfect magnet protection
  • Enclosure connection terminal, grille and gasket included in delivery

Technical data

IK S10-DVC2 – 2 x 2 Ohms
Power handling RMS / max.P300 / 600 Watts
Impedance Z2 x 2 Ω
DC resistance Re2 x 1.6 Ω
Resonance frequency Fs34 Hz
Mechanical Q factor Qms6.37
Electrical Q factor Qes0.49
Total Q factorQts0.45
ComplianceCms198 μm/N
Equivalent air volumeVas34 L
Force factor B*I12.7 Tm
Sensitivity SPL90.0 dB @ 2.83V / 1m
87.0 dB @ 1W / 1m
Cone area Sd353 cm²
Moving mass Mms112 g
Cone material Sandwich paper cone
Mechanical resistance Rms3.73 kg/s
Voice coil diameterø50.8 mm
Voice coil winding height 18 mm
Max. linear excursion Xmax+/- 6.0 mm
Outer diameterø262 mm / 10.31″
Installation diameterø229 mm / 9.01″
Installation depth 84.5 mm / 3.33″
  
Recommended enclosure volumes 
Sealed box 
Net volume 14 L
Lower limiting frequency (-3dB) 46 Hz
Recommended DSP settings Recommended “self-define” highpass filter with 45 Hz cut-off frequency and Q = 1.3;
additional EQ filter 100 Hz / Q = 1.0 / -3 dB
  
Vented box 
Net volume 16 L
Port diameterø70 mm / 2.76″
Port area 38 cm²
Port length 38 cm / 14.96″
Port tuning frequencyFb37 Hz
Lower limiting frequency (-3dB) 39 Hz
Recommended DSP settings Recommended “self-define” highpass filter with 37 Hz cut-off frequency and Q = 1.2;
additional EQ filter 95 Hz / Q = 0.7 / -3 dB

Scope of delivery

1 x Subwoofer HELIX IK S10-DVC2
1x Grille
1 x Gasket
1 x Enclosure connecting terminal
1 x Data sheet

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Helix IK S10 Slim 10″ Subwoofer”

Your email address will not be published. Required fields are marked *

Shipping & Delivery