Product updates are changing regularly, some Car Solutions may say out of stock. BUT- Please confirm via email or we can design a system that is equal too or better for the same price, so it is best to contact us. Please understand it's hard to guarantee exact delivery.
Helix H 400X 4 channel German Car Audio Amplifier
$1,700.00
The best of both worlds – extremely fast MOSFET driver circuits in Class A operation combined with enormously load-stable, power-potent “afterburners” in bipolar technology. This is the recipe for success for the particularly flat amplifiers, which, thanks to their sophisticated processor control, don’t get their feathers ruffled in any situation. Improved again and again over the years, these powerhouses with the characteristic, transparent enclosure covers have reached a sound level that is unrivaled, not only in the value-for-money category.
In stock
Output power RMS / max. | |
at 4 Ohms | 4 x 70 Watts / 140 Watts |
at 2 Ohms | 4 x 125 Watts / 250 Watts |
at 4 Ohms bridged | 2 x 250 Watts / 500 Watts |
Frequency response | 20 Hz - 20,000 Hz |
Highpass | 15 - 4,000 Hz adjustable |
Lowpass | 15 - 4,000 Hz adjustable |
Bandpass | 15 - 4,000 Hz adjustable |
Total harmonic distortion (THD) | < 0.009 % |
Signal-to-noise ratio | > 100 dB |
Damping factor | > 300 |
Input sensitivity | 0.7 - 8 Volts |
Dimensions (H x W x D) | 31.5 x 200 x 336 mm 1.24 x 7.87 x 13.23" |
- Extremely stable amplifiers in an extraordinary shallow heatsink
- Unique Bipolar output transistor technology for unparalleled natural and warm sound experience
- Fastest drivers for lowest possible THD
- Processor-controlled technology for optimized operation
- Fully active crossover with highpass, lowpass and bandpass filter
- "Input mode" switch for flexible input signal routing
- RMI (Realmixed Input) for generating an optimised mono-summing signal from
the left and right channels - Smart protection circuits against overheating, over- and undervoltage, speaker short circuiting, low impedance and faulty connection
- 24 carat gold-plated solid connection terminals suitable for 25 mm² / gauge 4
- Completely made in Germany by using only selected components
Weight | 10 kg |
---|---|
Dimensions | 40 × 10 × 30 cm |
You may also like…
Helix Director Remote Control with Touchscreen
Contact us for Availability
DIRECTOR
Everything under control! With the new remote control DIRECTOR you lead from the front! The 2.8” / 7 cm full –colour touchscreen display and the intuitive menu navigation allow an easy handling of many features – for example the volume control of all sources, volume control of the subwoofer, source selection, control and configuration of the HEC BT module or switching between sound setups. Furthermore it provides sufficient memory for 20 additional sound setups and comes with a USB connector allowing straight access to your DSP device via the DIRECTOR - a big relief if you want to tweak your configuration while your processor/amplifier is hidden somewhere in the trunk. The high-resolution colour touchscreen is embedded in an exclusive solid aluminium housing. The DIRECTOR is compatible with all DSP products which are supported by DSP PC-Tool Version 3 and 4.Helix URC.3 The universal remote control for HELIX and MATCH DSP products
Contact us for Availability
URC.3
The universal cable remote control URC.3 allows controlling different functions such as subwoofer volume or HEC / MEC / AUX volume of BRAX, HELIX and MATCH DSP products. It consists out of two rotary knobs and a switch, all of them can be freely defined software-wise. The specific configuration options for each product can be found in the "Device configuration menu” (DCM) of the DSP PC-Tool software The specific configuration options for each product you find in the "Device configuration" menu of the DSP PC-Tool software.Related products
Rockford Fosgate T600-4 4 channel Amplifier
Rockford Fosgate R2-750X5 Prime 750 Watt 5-Channel Amplifier
Rockford Fosgate PBR300X2 Punch 2 channel Amplifier
The Punch PBR300X2 uses our patented BRT (Boosted Rail Technology) for an ultra efficient design that does not use a switching power supply to generate its rated power. This allows the chassis design to be much smaller than traditional sized amplifiers. The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. It is great for smaller stealth installations, as well as for motorcycles and recreational vehicles.
Reviews
There are no reviews yet.