Small, efficient and uncompromisingly stable - the M ONE is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel.In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. Last but not least installation will be a no-brainer due to the minimal dimensions.

Output power RMS / max.
- @ 4 Ohms	1 x 240 / 480 Watts
- @ 2 Ohms	1 x 410 / 820 Watts
- @ 1 Ohm	1 x 600 / 1,200 Watts
- bridged @ 4 Ohms	-
- bridged @ 2 Ohms	-
Amplifier technology	Class D
Inputs	2 x RCA / Cinch 2 x Highlevel speaker input 1 x Remote In 1 x Remote control input
Input sensitivity	RCA / Cinch 0.5 - 6 Volts Highlevel 1.1 - 13 Volts
Input impedance RCA / Cinch	20 kOhms
Input impedance highlevel	13 Ohms
Outputs	1 x Speaker output
Output voltage RCA / Cinch	-
Signal converter for digital input	-
Frequency response	10 Hz - 250 Hz
Bass boost	0 - 12 dB / 25 - 75 Hz
Highpass	-
Lowpass	50 Hz - 250 Hz adjustable
Bandpass	10 Hz - 250 Hz adjustable
Subsonic	10 Hz - 50 Hz adjustable
Phase	0 - 180° adjustable
Slope high- / lowpass	-
Slope subsonic / lowpass	12 / 24 dB/Oct.
Signal-to-noise ratio digital input	-
Signal-to-noise ratio analog input	95 dB (A-weighted)
Distortion (THD)	0.20 %
Damping factor	100
Operating voltage	10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
Idle current	650 mA
Fuse	2 x 35 A Maxi-fuse (APX)
Additional features	Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control
Dimensions (H x W x D)	50 x 230 x 154 mm / 2.00 x 9.06 x 6.06”

Weight

6 kg

Dimensions

30 × 10 × 40 cm

Your previous cart was emptied because pre-orders must be purchased separately.

“Alpine Status System with 5-ch Amp, 12″ Subwoofer and Pods to suit Toyota Landcruiser Dual Cab Ute” has been added to your cart. View cart

This product cannot be added to your cart because it already contains a pre-order, which must be purchased separately.

Helix M One mono Car Audio amplifier

$770.00

Description

Output power RMS / max.
- @ 4 Ohms	1 x 240 / 480 Watts
- @ 2 Ohms	1 x 410 / 820 Watts
- @ 1 Ohm	1 x 600 / 1,200 Watts
- bridged @ 4 Ohms	-
- bridged @ 2 Ohms	-
Amplifier technology	Class D
Inputs	2 x RCA / Cinch 2 x Highlevel speaker input 1 x Remote In 1 x Remote control input
Input sensitivity	RCA / Cinch 0.5 - 6 Volts Highlevel 1.1 - 13 Volts
Input impedance RCA / Cinch	20 kOhms
Input impedance highlevel	13 Ohms
Outputs	1 x Speaker output
Output voltage RCA / Cinch	-
Signal converter for digital input	-
Frequency response	10 Hz - 250 Hz
Bass boost	0 - 12 dB / 25 - 75 Hz
Highpass	-
Lowpass	50 Hz - 250 Hz adjustable
Bandpass	10 Hz - 250 Hz adjustable
Subsonic	10 Hz - 50 Hz adjustable
Phase	0 - 180° adjustable
Slope high- / lowpass	-
Slope subsonic / lowpass	12 / 24 dB/Oct.
Signal-to-noise ratio digital input	-
Signal-to-noise ratio analog input	95 dB (A-weighted)
Distortion (THD)	0.20 %
Damping factor	100
Operating voltage	10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
Idle current	650 mA
Fuse	2 x 35 A Maxi-fuse (APX)
Additional features	Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control
Dimensions (H x W x D)	50 x 230 x 154 mm / 2.00 x 9.06 x 6.06”

Additional information

Weight	6 kg
Dimensions	30 × 10 × 40 cm

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Helix M One mono Car Audio amplifier”

Shipping & Delivery